# KS0417 Keyestudio micro:bit 1W LED Module

![](media/image-20260119091519545.png)

## 1. Description

This LED module is fully compatible with micro:bit control board. It will emit the white light. The max operating current is 400mA; the maximum power is 1W.

When using, connect the LED module to micro:bit control board using Crocodile clip line.

There are total 6 rings on the module. Two G rings, two V rings and two S rings are separately connected.

When using, G ring for ground; V for 3V; S for signal pin (0 1 2). When signal end is HIGH, LED lights.

## 2. Technical Parameters

- Working voltage: DC 3.0-3.3V
- Working current: 400mA
- Power: 1W
- Light Color: white
- Size: 31mm * 27mm * 8mm
- Weight: 2.4g
- Environmental attributes: ROHS

![](media/image-20260119091652600.png)

## 3. Connection Diagram

![image-20260119091737996](media/image-20260119091737996.png)

## 4.Source Code

Download code : [Code](./Code.7z)

![](media/image-20260119091914766.png)

## 5.Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module should flash for one second, then off for one second, circularly and alternately.

![](media/image-20260119092047766.png)