KS0552 Keyestudio Writing Machine for Arduino DIY

• KS0552 Keyestudio Writing Machine for Arduino DIY
• Read me frist
• 1. Features
• 2. Parameters
• 3. Preparation
  • 3.1 Installation
  • 3.2 Install Arduino IDE and burn firmware
  • (1). Install Inkscape and Gcode
  • (2). Add extension package
  • (3). Turn off inkscape and reboot it
  • 3.3 Install Universal Gcode Sender
  • (1). Unzip software package
  • (2). Open the software
• 4. Modify firmware parameters
  • 4.1 Wire up a power supply with USB cables
  • 4.2 Connect the machine to the Universal Gcode Sender
  • 4.3 Control the machine to move
  • 4.4 Set motion parameter
  • 4.5 Setting method
  • 4.6 Adjust the distance between the writing head and the paper
  • 4.7 Adjust speed to write and draw
• 5. Generate pictures into Gcode through Inkscape
  • 5.1 Generate pictures into Gcode
  • 5.2 Open example pictures
  • 5.3 Generate outline picture
• 6. Control the machine to draw via Universal Gcode Sender
• 7. Turn fonts into Gcode through Inkscape
  • 7.1 Write a poem through inkscape
  • 7.2 Deal with filled fonts
  • 7.3 Hollow Fonts
  • 7.4 Mongline fonts
  • 7.5 Transform fonts into Gcode
  • 7.6 Control the machine to write through Universal Gcode Sender
• Get started with Arduino
  • 1. Windows System：
    • 1.1 Installing Arduino IDE
    • 1.2. Install the driver of CH340：
    • 1.3. Arduino IDE Setting：
    • 1.4. Start your program:
  • 2. Mac System:
    • 2.1 Install Arduino IDE on MAC System
    • 2.2 Download the CH340 driver
    • 2.3 How to install the CH340 driver
    • 2.4 Setting Arduino IDE
  • 3. Burn the firmware of the writing machine
• Writing machine software download
  • 1. Inkscape
  • 2. Universal Gcode Sender