Thanks for your appreciation to Keyestudio.
We will keep devoting ourselves to provide you with good products and services!
About Keyestudio
Keyestudio is a best-selling brand owned by KEYES Corporation. Our product contains Arduino development boards, expansion boards, sensors and modules, Raspberry Pi, micro: bit expansion boards as well as smart cars, which can help customers at any level to learn about Arduino , Raspberry Pi and micro: bit.
Notably, all of our products are in line with international quality standards and are greatly appreciated in a broad menu of different markets across the world.
Welcome to check out more contents from our official website: http://www.keyestudio.com
Obtain Information and After-sales Service
Download address: https://fs.keyestudio.com/KS0562F
If something is found missing or broken, or you have some difficulty learning the kit, please feel free to contact us. Welcome to send email to us : service@keyestudio.com
We will endeavor to update projects and products continuously from your sincere advice!
Warning
This product contains tiny parts (Resistors and LEDs), so please keep out of reach of children to prevent scratches or ingestion. Please use it under adult supervision if children under 7 years old.
This product contains conductive parts (control board and electronic module). Please operate according to the requirements of tutorials. Improper operation may damage parts due to overheating. Do not touch and immediately disconnect the circuit power.
Copyright
The keyestudio trademark and logo are the copyright of KEYES DIY ROBOT co.,LTD. All products under Keyestudio brand can’t be copied, sold or resold without authorization by anyone or company.
If you are interested in our products, please contact to our sales representatives : fennie@keyestudio.com
home
1. Introduction
Do you want to learn about programming?
As long as you are passionate about science and dare to explore new things, our Keyestudio Student Starter Learning Kit with Mainboard is surely the best choice for you. The kit is a learning kit based on Arduino C language programming, making resistors, LEDs, capacitors and buttons accessible.
These components are suitable for a host of microcontrollers and Raspberry Pi, which can be used to create some interesting projects based on the Arduino development board, such as LED flash, button-controlled lights as well as light-controlled lights.
Meanwhile, it provides the knowledge and application of multimeters in a way that helps you better understand these components and the Arduino board. In addition, you can master the use of electronics, physics, science and programming by building up experiment with this kit.
2. Kit List
NO. |
Components |
QTY |
Picture |
---|---|---|---|
01 |
Resistance Card |
1 |
|
02 |
Jumper Wire |
30 |
|
03 |
8*8 Dot Matrix |
1 |
|
04 |
1-Digit Tube Display |
1 |
|
05 |
4-Digit Tube Display |
1 |
|
06 |
Breadboard |
1 |
|
07 |
100Ω Resistor |
10 |
|
08 |
100KΩ Resistor |
10 |
|
09 |
330Ω Resistor |
10 |
|
10 |
1KΩ Resistor |
10 |
|
11 |
4.7KΩ Resistor |
10 |
|
12 |
10KΩ Resistor |
10 |
|
13 |
47KΩ Resistor |
10 |
|
14 |
220Ω Resistor |
10 |
|
15 |
Servo |
1 |
|
16 |
Red LED |
5 |
|
17 |
Yellow LED |
5 |
|
18 |
Blue LED |
5 |
|
19 |
Green LED |
5 |
|
20 |
RGB LED |
1 |
|
21 |
Electrolytic Capacitor |
5 |
|
22 |
100NF-104-Ceramic Capacitor |
5 |
|
23 |
10NF-103-Ceramic Capacitor |
5 |
|
24 |
Button |
4 |
|
25 |
Blue Cap |
2 |
|
26 |
Yellow Cap |
2 |
|
27 |
Toggle Switch |
2 |
|
28 |
Potentiometer |
1 |
|
29 |
Passive Buzzer |
1 |
|
30 |
Active Buzzer |
1 |
|
31 |
Thermistor |
1 |
|
32 |
Tilt Switch |
2 |
|
33 |
LM35 Temperature Sensor |
1 |
|
34 |
Photoresistor |
3 |
|
35 |
Flame Sensor |
1 |
|
36 |
9V Battery |
1 |
|
37 |
Battery Snap Connector + DC Jack |
1 |
|
38 |
NPN Transistor(S8050) |
2 |
|
39 |
PNP Transistor(S8550) |
2 |
|
40 |
328 PLUS Mainboard |
1 |
|
41 |
USB Cable |
1 |
|
42 |
XL830L Multimeter |
1 |