keyestudio KS4038 KS4039 Starter

• Product Introduction
  • 1. Description
  • 2. Kit
  • 3. Features
  • 4. Parameters
  • 5. Keyestudio Micro：bit 16-channel Servo Shield
    • 5.1. Introduction
    • 5.2. Parameter
    • 5.3. Schematic Diagram
• Installation Steps
  • Essential Pre-Installation Reading:
  • Part 1: Base
  • Part 2: Bottom Servo
  • Part 3: Left (Left Board + Left Servo)
  • Part 4: Right (Right Board + Right Servo)
  • Part 5: Bracket
  • Part 6: Left Parts + Bracket
  • Part 7: Step 6 + Step 4 + Cylindrical Supporter
  • Part 8: Middle
  • Part 9: Claw Servo
  • Part 11: Robot Arm Control
  • Wiring and Micro:bit Mainboard Installation
  • Complete Robot Arm
• Microbit Basic Tutorial(MakeCode)
  • 1. Getting Started with Micro:bit
  • 2. CoolTerm Installation
  • Project 1: Heartbeat
    • (1) Project Description
    • (2) Components Needed:
    • (3) Test Code:
    • (4) Test Results:
  • Project 2: Light A Single LED
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code:
    • (4) Test Results
  • Project 3: LED Dot Matrix
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code 1:
    • (4) Test Results 1:
    • (5) Test Code 2:
    • (6) Test Results 2 :
  • Project 4: Programmable Buttons
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code 1 :
    • (4) Test Results 1 :
    • (5) Test Code 2 :
    • (6) Test Results 2:
  • Project 5: Temperature Detection
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code 1 :
    • (4) Test Results 1:
    • (5) Test Code 2 :
    • (6) Test Results 2:
  • Project 6: Geomagnetic Sensor
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code 1 :
    • (4) Test Results 1 :
    • (5) Test Code 2:
    • (6) Test Results 2
  • Project 7: Accelerometer
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code 1 :
    • (4) Test Results 1:
    • (5) Test Code 2 :
    • (6) Test Results 2
  • Project 8: Light Detection
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code:
    • (4) Test Results:
  • Project 9: Speaker
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code :
    • (4) Test Results:
  • Project 10: Touch-sensitive Logo
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code :
    • (4) Test Results:
  • Project 11: Microphone
    • (1) Project Description:
    • (2) Components Needed:
    • (3) Test Code 1:
    • (4) Test Results 1:
    • (5) Test Code 2:
    • (6) Test Results 2:
  • Project 12: Bluetooth Wireless Communication
    • (1) Project Description:
    • (2) Preparation
    • (3) Install Micro:bit:
    • (4) Test Code :
• Microbit Robot Arm Tutorial(MakeCode)
  • General Guide on Importing Micro:bit Extensions
  • Project
    • Project 13 Rotation of Robot Arm and Control Pins
    • Project 14 Rotation of Servo
    • Project 15 Button Controls Servo
    • Project 16 Read the Joystick
    • Project 17 Joysticks Control Robot Arm
    • Project 18 Read BT Data
    • Project 19 BT Controls Robot Arm
• Python Tutorial