5. Kidsblock Tutorial
5.4 Projects
In this section, we will start from a single sensor and move to complex experiments to introduce you to how the tank robot works.
Note: (G), marked on each sensor and module, is the negative pole and connected to “G”, “-” or “GND” on the sensor shield or control board; (V) is the positive pole and linked with V, VCC, + or 5V on the sensor shield or control board.
- Project 1: LED Blinks
- Project 2: Adjust LED Brightness
- Project 3: Photoresistor
- Project 4: Line Tracking Sensor
- Project 5: Servo Control
- Project 6: Ultrasonic Sensor
- Project 7: IR Reception
- Project 8: Motor Driving and Speed Control
- Project 9: 8*16 Facial Expression LED Dot Matrix
- Project 10: Light-following Tank
- Project 11: Ultrasonic Sound-following Tank
- Project 12: Ultrasonic Obstacle Avoidance Tank
- Project 13: Move-in-Confined-Space Tank
- Project 14:Line-tracking Tank
- Project 15: IR Remote Control Tank
- Project 16: Bluetooth Remote Control
- Project 17: Bluetooth Control Tank
- Project 18: Ultrasonic Tank Robot Multiple Functions
- Project 19: Flame Sensor
- Project 20: Fan
- Project 21: Fire Extinguishing Tank
- Project 22: Fire Extinguishing Robot Multiple Functions